The simplest grinder made from an angle grinder, a bicycle hub and a timing roller

A belt sander is often easier to use than regular sandpaper. This is quite large equipment, unsuitable for a cramped workshop. If you lack space for storing a belt sander, you can choose a compromise option - make a grinder attachment for an angle grinder. In terms of functionality, it almost corresponds to a full-size machine, while being much more compact and cheaper.
The simplest grinder from a bicycle hub grinder and a timing roller

Materials:


  • profile pipes 10x10 mm, 40x40 mm;
  • bolts, nuts M6-M16;
  • strip 40x10 mm;
  • bicycle wheel hub;
  • belt tension roller with bearing;
  • extension spring;
  • sanding belt.

Machine manufacturing process


The simplest grinder from a bicycle hub grinder and a timing roller

To assemble the machine bed, you need to take a 40x40 mm profile pipe equal in length to the angle grinder and weld a small section of any sufficiently strong profile 8-10 cm to it in the middle.
The simplest grinder from a bicycle hub grinder and a timing roller

A strip of 40x10 mm is welded to the resulting T-shaped blank. It will serve as a stand for tensioning the roller. Its length should be greater than the size of the tape that you plan to use.
The simplest grinder from a bicycle hub grinder and a timing roller

To attach the angle grinder to the frame, you need to prepare 2 threaded bolts as used on its standard handle. The profile pipe is drilled from below so that it is possible to attach an angle grinder to it by screwing a bolt into the hole for the handle.
The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

Next, an L-shaped mount on the side is welded from a thin profile pipe. It is also drilled to allow the second mounting bolt to be screwed into the side hole for the handle.
The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

A bicycle wheel hub is installed on the angle grinder shaft. To do this, you need to weld a spare standard nut onto it to clamp the cutting disc or a regular M14.
The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

The bushing will act as a drive roller. The old timing belt tension roller of the car will serve as a slave. To do this, you will need to select and press a bearing into it.
The simplest grinder from a bicycle hub grinder and a timing roller

Using a steel strip, you need to make a tension arm for the driven roller. A hole is made in it and in the stand previously welded to the frame to tighten the parts with a bolt.
The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

The drilling distance is selected according to the size of the existing sanding belt. A hole is made at the edge of the shoulder for screwing the driven roller. On the bolt used for this, you can install the required number of nuts and washers to move the extension of the driven roller in line with the drive one.
The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

To tension the tape, you need to install a spring, hooking it to the edge of the shoulder opposite to the roller. To hook from below, you need to weld a small bolt to the rack.
The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

This tool can be used suspended when stripping pipes, or clamped in a vice for more delicate work. Since it uses narrow rollers, a purchased sanding belt can be cut into several narrow rings, which will provide significant savings on abrasive materials.
The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

The simplest grinder from a bicycle hub grinder and a timing roller

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)