How to make a powerful vice from a diamond screw jack

Typically, diamond-type screw jacks are used on passenger cars. Their main purpose is to lift the car to change a wheel. But based on them, you can independently make very powerful vices with high compression force.
How to make a powerful vice from a diamond screw jack

Will need


To make a vice we will need the following materials and products:
  • channel of the required size;
  • rhombic screw jack;
  • steel strips of various widths;
  • countersunk bolts;
  • hex bolts and nuts;
  • long bolt with nut.

Also for work you will need a bench vice, a drilling machine, a grinder, a welding machine, a pendulum saw, a metal file, a tap with a crank, etc.

Manufacturing process of a vice based on a screw jack


We use a channel as a base and guide, the size of which is selected based on the results of a strength calculation. We weld vertical posts from the same channel to the base at both ends.
In the wall of the base along the longitudinal axis of the vertical posts, we make holes on a drilling machine using a core drill.
How to make a powerful vice from a diamond screw jack

Between the holes, according to the markings, we cut out a groove with a grinder, which we process along the length with a metal file, removing burrs and rounding the edges.
How to make a powerful vice from a diamond screw jack

Using a pendulum saw, we cut off a fragment of the required length from the channel from which the base is made. Use a grinder to remove the corners of the shelves at 30 degrees from one end.
How to make a powerful vice from a diamond screw jack

We cut off a fragment from the metal strip and weld it to the end of the channel from the side with intact shelves.
How to make a powerful vice from a diamond screw jack

We drill two holes in its wall closer to the opposite end and cut threads into them.
How to make a powerful vice from a diamond screw jack

Between the shelves in front of the bevels we insert a strip of metal of sufficient thickness and weld it there. We drill a hole in its center and also cut the thread.
How to make a powerful vice from a diamond screw jack

How to make a powerful vice from a diamond screw jack

We weld the plate, which moves freely along the groove of the base, to the end of the movable clamp and drill two through holes in it, located longitudinally closer to the ends. Then we cut threads into them.
How to make a powerful vice from a diamond screw jack

How to make a powerful vice from a diamond screw jack

We install the movable clamp on the base so that the guide bar fits into the longitudinal groove. We screw the screw jack through two holes in the lower stop with bolts and nuts to the vertical post.
Next, through the hole in the upper stop of the jack, using a bolt and washer, we connect it to the movable clamp.
We cut off the plate wider than the transverse dimension of the groove and drill two holes in it along the length opposite the holes in the guide bar of the movable clamp.
How to make a powerful vice from a diamond screw jack

We turn the vice over and place a washer on the holes in the guide bar. We place a wide strip with two holes on top of the groove in the base wall and connect these two elements with bolts.
How to make a powerful vice from a diamond screw jack

How to make a powerful vice from a diamond screw jack

We cut two fragments of equal length from a wide strip.We drill two holes in them along the long edge and drill them for the bolt heads. We fix them on fixed and movable clamps using the corresponding threaded holes.
How to make a powerful vice from a diamond screw jack

How to make a powerful vice from a diamond screw jack

Insert a long bolt into the holes in the jack power screw bracket and screw a nut onto the thread.
How to make a powerful vice from a diamond screw jack

Our vices are fully assembled and ready to use.
How to make a powerful vice from a diamond screw jack

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)