A device for quickly changing oil in gasoline vehicles

A device for quickly changing oil in gasoline vehicles

Changing the oil in a motorcycle, moped, chainsaw, or lawn mower quickly and without unscrewing the nuts is quite possible using this simple device.
Simply unscrew the filler cap, insert the tube and pump out the oil. Next, fill in a new one. All.

Will need


  • Plastic bottle.
  • Silicone hose 2-3 meters.
  • The container of the required volume for draining is a liter jar with a metal lid.
  • A half-meter piece of solid nylon tube.

A device for quickly changing oil in gasoline vehicles

Manufacturing a device for quickly replacing working fluids


We cut the silicone hose into equal parts of 1-1.5 meters.
Cut off the neck of the bottle. Use a step drill to make a hole in the lid for the hose. We thread it into the hole, everything should fit very tightly, so calculate the diameter of the hole in advance. It will be easier to thread the silicone hose if its end is cut at an angle.
A device for quickly changing oil in gasoline vehicles

We insert a piece of nylon tube into another section of the hose.
A device for quickly changing oil in gasoline vehicles

We drill two holes in the lid of the jar for the hoses.
A device for quickly changing oil in gasoline vehicles

We thread the ends of the tubes into the holes so that the end of the silicone hose with the nylon tube at the other end is 1-2 cm lower.
A device for quickly changing oil in gasoline vehicles

The device is ready.

Usage


You need to work with the device like this: We turn on the vacuum cleaner and bring the neck of a plastic bottle with a tube to its inlet pipe. Naturally, it sticks and won’t go anywhere.
Close the jar with a lid. And using another hose we pump out the required working fluid.
A device for quickly changing oil in gasoline vehicles

Under the influence of a vacuum, it easily falls into the intake jar. And thanks to the use of a solid piece of tube at the end, it is very convenient to lower it into narrow holes.
For example, let’s take a lawn mower that needs to change the oil. We unscrew the plug with the dipstick, insert the solid tube until it stops. And we pump out the used oil into a jar.
A device for quickly changing oil in gasoline vehicles

The main thing is to monitor the level and not allow the oil to reach the top tube, otherwise it will go into the vacuum cleaner.
A device for quickly changing oil in gasoline vehicles

This is how quickly, without unscrewing anything, you can change the working fluid in just 1-2 minutes.
When using a larger collection container and using pipes with a larger diameter, this device can also be used to pump oil from the crankcase or gearbox of a car.

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (2)
  1. Alexander Guzyaev
    #1 Alexander Guzyaev Guests 11 November 2019 14:39
    4
    It is a thousand times easier to unscrew the drain bolt and drain the oil!
    1. Vita
      #2 Vita Guests 9 May 2020 19:27
      3
      We are talking about replacement, which means someone needs to decide on the drain and fill...