DIY garden hose reel from a car wheel

Plastic and rubber watering hoses, especially long ones, are not easy to unwind and rewind every time. Leaving them on the beds or lawn for the whole season is also not a good idea: you will constantly cling to them with your feet, you can accidentally damage them with something sharp, and under the rays of the sun they will quickly become unusable. We will make a reel for the watering hose.
DIY garden hose reel from a car wheel

Will need


You can make a means for assembling and storing a garden hose from waste materials, while others cost pennies. We must prepare the following before starting work:
  • bead ring from a truck wheel;
  • disc and wheel hub from a passenger car;
  • aerosol paint in cans;
  • square steel rod;
  • fasteners (bolts, nuts, washers);
  • plastic caps and polymer tape.

To make a hose reel we will need: a grinder with a cutting disc, a hammer and a center punch, a drill with a drill, a level gauge, a tape measure and a marker, welding equipment, mechanical emery and pliers.

Manufacturing process


Cut the bead ring in half using a grinder and a cutting disc. We divide one half again into two equal parts.
Place half of the disk vertically with its ends on a flat surface. We lay the quarters close to it from the inside with their convex sides outward, closer to one edge and symmetrically to each other.
Using a level gauge, we check the vertical position of the disk half and weld it to the quarters.
DIY garden hose reel from a car wheel

At the very top, we weld a wheel hub from a passenger car to the vertical element so that its flange is directed towards the long ends of the horizontal elements.
DIY garden hose reel from a car wheel

We attach the disc to the hub and check the ease of rotation in the hub bearing. If the two parts are from different machines, the holes may not match. Then, using the hub as a template, you need to mark and then drill new holes in the disk with a drill.
DIY garden hose reel from a car wheel

DIY garden hose reel from a car wheel

We paint the assembled assembly (without the disk) using a can of aerosol paint.
DIY garden hose reel from a car wheel

From square-section rods we cut eight blanks of equal length, the ends of which are processed (rounded) using mechanical sandpaper.
DIY garden hose reel from a car wheel

Using a level gauge, marker, drill and pliers, we make four rectangular cuts on the disks on both sides, evenly spaced around the circumference.
DIY garden hose reel from a car wheel

We place radially square rods, slightly inclined upwards, into these cutouts and weld them in this position.
DIY garden hose reel from a car wheel

We process the welding areas with a grinder and paint the assembly with a can of aerosol paint.
DIY garden hose reel from a car wheel

We install the disk on the hub and secure it with three bolts and nuts. We wrap electrical tape around the ends of the rods and tightly fasten the plastic caps.
DIY garden hose reel from a car wheel

DIY garden hose reel from a car wheel

The reel is completely ready for use.Let's check it in action: we fix the end of the hose on the disk and begin to rotate it using the handle bars, which will simultaneously serve as limiters for the hose.
DIY garden hose reel from a car wheel

Winding is quite easy since the disc rotates on the hub bearing. To unwind it, just pull the free end.
DIY garden hose reel from a car wheel

DIY garden hose reel from a car wheel

Watch the video


[media=https://www.youtube.com/watch?v=0faWpaObnVU]
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)