USB charger that will charge all gadgets at once

USB charger that will charge all gadgets at once

In modern times, we have more and more electronic devices. Smartphones, tablets, smart watches, MP-3 players. Charging them at the same time sometimes becomes a task. You can, of course, take an extension cord for a certain number of sockets and organize your own charging corner. I usually don’t use my smartphone when charging.
I decided to make my own charging station for charging. It takes up one outlet and is not difficult to make.

Will need


The basis is an old power supply from a computer. I received the board without a case. There is no standby source on the board and there are no 3.3 volt elements. It feels like it wasn't there. Everything looks neat.
USB charger that will charge all gadgets at once

In the bins I took the case from the computer power supply. You can use any suitable one. But the board has the right place in this case.
USB charger that will charge all gadgets at once

USB sockets were ordered from China. I decided to install 7 pieces. I didn't want to put it too closely. Of course, you can arrange it differently, then more will fit. I am satisfied with this quantity.
USB charger that will charge all gadgets at once

My mains switch is the T3 toggle switch. Any one can be used. My toggle switch breaks both network wires.
USB charger that will charge all gadgets at once

The indicator is domestic Light-emitting diode. I connect it through a 1 kOhm current-limiting resistor to a 12-volt line.
USB charger that will charge all gadgets at once

I will install the USB on PVC plastic. I really like this plastic, it is very easy to work with.
USB charger that will charge all gadgets at once

We make a charging station for USB gadgets


I mark the holes for the sockets. Also under the power switch and Light-emitting diode. I mark it on the protective film.
USB charger that will charge all gadgets at once

I cut out all the windows and drill holes. I remove the protective film.
USB charger that will charge all gadgets at once

I duplicate the holes on the power supply housing panel. I paint their PVC panels. I also paint the lower part of the power supply housing.
USB charger that will charge all gadgets at once

I also painted the housing cover. I paint everything with matte paint, I had this in stock.
USB charger that will charge all gadgets at once

I unsolder the original power supply wires. Instead of soldered wires, I solder in a couple of others. Green minus, red plus. The twisted wire will go to Light-emitting diode.
USB charger that will charge all gadgets at once

I screw the panel on. I'm installing a switch. I also reinstall the network connectors (I removed them when painting).
USB charger that will charge all gadgets at once

I install the nests in the windows and secure them with thermal glue. Light-emitting diode I also secured it with glue.
USB charger that will charge all gadgets at once

I connect the positive contacts to each other, and the negative contacts too. I soldered a resistor to the LED, and hid the resistor in a heat-shrinkable tube. Soldered the power to the LED.
USB charger that will charge all gadgets at once

I soldered the positive and negative wires from the board to the jumpers of the USB sockets. There was a piece of plastic left from the old project, which was used to fix the USB. The nests are firmly seated. The main thing is not to overdo it with hot glue; you can fill the springs in the sockets. I had to soften the glue a little; the connectors did not fit into the socket.
USB charger that will charge all gadgets at once

Unsoldered the switch. I fixed the wires with electrical tape, it’s kind of prettier.
USB charger that will charge all gadgets at once

I put the lid on and screw it on. This is such a neat charging station. At the same time, I connected a smartphone, MP-3 player, and Powerbank to it.I tested the unit under a load of 5 amperes, everything works fine.
USB charger that will charge all gadgets at once

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (4)
  1. Anton
    #1 Anton Guests 19 December 2018 17:06
    0
    How many amperes does it take to charge?
    1. boyfox
      #2 boyfox Guests December 29, 2018 11:47
      3
      How long will the phone accept?
  2. Alex
    #3 Alex Guests 13 November 2020 09:17
    0
    Horse size)
  3. I
    #4 I Guests 3 October 2021 17:35
    3
    with this connection, charging will take no more than 0.5A per device