Felt Pikachu children's wallet
A wallet is a fashionable and practical accessory because children love to carry their pocket money, keys and other small items in them. Let's please little fashionistas and sew a Pikachu children's wallet from felt. Anime fans will especially like this wallet. Let's get started!
For this we need:
Step 1. Take yellow felt and draw two circles on it, you can draw them using a compass or circle something round, for example a cup (10 cm in diameter + 1 cm for seams), then also on the yellow felt we draw ears about 9 cm long We leave +1 cm for the seams. Next, on red felt we draw 2 circles with a diameter of 3 cm (cheeks), on black felt there are also 2 circles, but slightly smaller eyes) we also cut out a small nose and mouth in the shape of a curved strip, and on white felt we draw 2 very small circles, these will be highlights on the eyes, they will give our Pikachu expressiveness.
Step 2. Carefully cut everything out. I decided to choose felt, because it does not unravel when cutting out and it is very soft and pleasant to the touch.
Step 3.Next, take the zipper and pin it to one of the yellow circles and then carefully sew it on the machine with a fine seam.
Step 4. We do the same with the second circle, make sure that the circles are pinned exactly relative to each other. We stitch by car.
Step 5. Next, from the wrong side, we place the circles on top of each other and stitch them on a machine; for reliability, you can go over the edge with an overlocker or simply use a zigzag seam. Turn it right side out.
Step 6. Take the Pikachu ears we prepared in advance and stitch them on the machine and turn them right side out.
Step 7. Next, take one ear and smear its tip with hot glue and wrap it in a piece of black felt and press it very tightly, when the glue has cooled, cut it into the shape of the ear, the result should be an ear wrapped in black felt on both sides. We do the same with the second ear.
Step 8. We carefully make small slits on one of the sides, then take one ear and put it into the slot, securing it on the inner and outer sides with a glue gun.
Step 9. Take the previously prepared eyes, cheeks and mouth and glue them as shown in the photo. Also, if desired, to make the wallet easier to open, you can attach a strip of felt to the zipper pulley.
And so, our cool and very cute Pikachu wallet is ready! In just a few simple steps we got such a wonderful present, from which no one will remain indifferent!
For this we need:
- - felt (yellow, white, black, red);
- - zipper 10 cm long;
- - Moment glue;
- - scissors.
Step 1. Take yellow felt and draw two circles on it, you can draw them using a compass or circle something round, for example a cup (10 cm in diameter + 1 cm for seams), then also on the yellow felt we draw ears about 9 cm long We leave +1 cm for the seams. Next, on red felt we draw 2 circles with a diameter of 3 cm (cheeks), on black felt there are also 2 circles, but slightly smaller eyes) we also cut out a small nose and mouth in the shape of a curved strip, and on white felt we draw 2 very small circles, these will be highlights on the eyes, they will give our Pikachu expressiveness.
Step 2. Carefully cut everything out. I decided to choose felt, because it does not unravel when cutting out and it is very soft and pleasant to the touch.
Step 3.Next, take the zipper and pin it to one of the yellow circles and then carefully sew it on the machine with a fine seam.
Step 4. We do the same with the second circle, make sure that the circles are pinned exactly relative to each other. We stitch by car.
Step 5. Next, from the wrong side, we place the circles on top of each other and stitch them on a machine; for reliability, you can go over the edge with an overlocker or simply use a zigzag seam. Turn it right side out.
Step 6. Take the Pikachu ears we prepared in advance and stitch them on the machine and turn them right side out.
Step 7. Next, take one ear and smear its tip with hot glue and wrap it in a piece of black felt and press it very tightly, when the glue has cooled, cut it into the shape of the ear, the result should be an ear wrapped in black felt on both sides. We do the same with the second ear.
Step 8. We carefully make small slits on one of the sides, then take one ear and put it into the slot, securing it on the inner and outer sides with a glue gun.
Step 9. Take the previously prepared eyes, cheeks and mouth and glue them as shown in the photo. Also, if desired, to make the wallet easier to open, you can attach a strip of felt to the zipper pulley.
And so, our cool and very cute Pikachu wallet is ready! In just a few simple steps we got such a wonderful present, from which no one will remain indifferent!
Similar master classes
Particularly interesting
Comments (0)