DIY Christmas tree made from office paper

In order to decorate your room for the holiday, you don’t have to buy expensive garlands, artificial Christmas tree branches or glass balls. You can make a Christmas tree from ordinary office paper. Even used. At the same time, she will look no worse and even more amazing.
DIY Christmas tree made from office paper

To add shine to such a Christmas tree, it’s worth taking some rain. It will simultaneously replace Christmas tree decorations and fill the gaps between the paper “crown”.
Materials:
  • A4 paper – 4 sheets;
  • paper clips;
  • PVA glue;
  • rain – 1 m;
  • wire – 30 cm.

DIY Christmas tree made from office paper

Operating procedure


1. Cut a sheet of paper lengthwise.
DIY Christmas tree made from office paper

2. We fold each strip like an accordion. One fold – 1.5 cm.
DIY Christmas tree made from office paper

3. Fold the resulting strip in half.
DIY Christmas tree made from office paper

4. Glue the two outer edges and secure them with a paper clip (until dry).
DIY Christmas tree made from office paper

5. For the circle we will need two such blanks of the same size.
DIY Christmas tree made from office paper

6. Glue them together and fasten them with paper clips.
DIY Christmas tree made from office paper

7. As a result, the paper accordion will form a circle.
DIY Christmas tree made from office paper

8. In order for our Christmas tree to have a shape that sharpens towards the top, the next circle needs to be made of a smaller diameter. To do this, cut the accordion strip by 1.5 cm.We make the circle like the previous one. And we cut each subsequent piece by another 15 cm. For this Christmas tree you will need 5 round parts.
DIY Christmas tree made from office paper

9. Bend the wire tip at an angle of 90 degrees. This will prevent the parts from slipping off.
DIY Christmas tree made from office paper

10. We string the base circle (the largest) onto the wire until it rests on the bend.
DIY Christmas tree made from office paper

11. The next layer should consist of rain. We lay it out at the edge of the paper part. We cut it off, leaving an additional 2 cm. We fasten the ends of the rain together. If the rain is on a wire base, just twist the ends.
DIY Christmas tree made from office paper

12. We string the next paper circle onto the wire. And we repeat everything.
DIY Christmas tree made from office paper

13. We make the top layer from rain. We wrap it around the wire. We bite off the excess with pliers.
DIY Christmas tree made from office paper

DIY Christmas tree made from office paper
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (2)
  1. lenavt
    #1 lenavt Guests 28 August 2017 18:56
    0
    Funny. Easy to do in the office, without bothering yourself with looking for materials. I'll definitely have to try it for New Year's Eve. I’m just using up the extra reserves of drafts. And if you also use multi-colored leaves. cool)
  2. Sun
    #2 Sun Guests September 6, 2017 10:17
    2
    When you are sitting at work before the New Year, you want a holiday, but you just don’t want to work, you can start making such a Christmas tree :)