Christmas tree toy "Hat"

To make a New Year's tree toy in the form of a miniature hat, you will need the following materials and tools:
1. cardboard roller (cylinder),
2. a small piece of thick cardboard,
3. glue “Moment crystal”,
4. scissors,
5. simple pencil,
6. compass,
7. fabric for covering the hat,
8. threads in the color of the fabric,
9. needle for handwork,
10. beads, beads and lace to decorate the hat,
11. iron.

Cardboard rolls or cylinders are often used in manufacturing as a basis for winding textile materials, such as curtain tape, or the basis for adhesive tape. In a word, it’s easy to find such a blank for a hat at home, or ask at a fabric store, or simply glue it together from thick cardboard.

Christmas toy Hat


One of the end sides of the cylinder should be sealed with a cardboard bottom. You also need to cut out the brim for the future hat. It is important that they proportionally correspond to the size of the cylinder.

Christmas toy Hat


A fabric circle with a diameter exceeding the diameter of the cylinder by 2 cm should be glued on top of the bottom.

personal toy hat


Then you need to cut out a rectangle, the length and height exceeding the linear dimensions of the cardboard cylinder by 2-3 cm. One long and one short edge of the fabric should be ironed 1 cm, the fabric blank should be glued to the cylinder, with the ironed edges overlapping the open cuts.

Christmas toy Hat


The brim of the hat is also covered with fabric. To do this, you need to cut a strip, the length of which will be equal to the length of the outer circumference of the cardboard fields + 2 cm, and the width will be equal to the width of the fields + 1 cm. One long section of the strip must be ironed 1 cm, and the short sides must be sewn together with a 1 cm seam.

Christmas toy Hat


Use the ironed edge to glue the strip to the cardboard fields.

Christmas toy Hat


Using a thread and a needle, you should fix the flying edge of the strip of fabric, folded into uniform small folds.

Christmas toy Hat


We glue the prepared cylinder and the brim of the cap together.

Christmas toy Hat


The finished hat can be decorated with lace and decorative beads. In addition, you need to make a long (at least 15 cm) loop from threads and beads in the upper part of the cylinder to hang the toy on a Christmas tree branch.

Christmas toy Hat


On the back side of the brim of the hat, you should glue a circle of fabric so that the toy looks neat from absolutely all sides.

Christmas toy Hat


The Christmas tree toy in the form of a miniature hat is ready!
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)