Demoness OOAC from an old doll

The OOAC technique involves remaking an old doll. From English the abbreviation OOAK is translated as “one of a kind” - “One Of A Kind”.
Materials:
To create a lady vampire or demoness you will need:
  • An unnecessary doll.
  • Wide and narrow satin ribbons - 5 m each. Lighter.
  • Lots of beads, bugles and beads.
  • Thick wire.
  • Double sided tape.
  • Bead needle and thread. Scissors.
  • Paints and brushes.
  • Fixing varnish and acetone.
  • Acrylic threads.
  • Polymer clay
.

New life for the doll: preparation and repainting
Transforming a doll is a simple process, but very labor-intensive, so you should prepare for a number of evenings that you will have to spend with the craft.
To begin with, the old doll hair is removed - it is cut off and pulled out.
You need to wipe off all the factory paint from the face.

Demoness OOAK


Repaint all parts of the doll in the desired color. White paint is suitable for a vampire lady. It is worth repainting after adding all the necessary fantastic details.

Demoness OOAK


Paint the body and face. The doll's eyes are black with vertical white-silver pupils. The dot painting on the face makes the look unearthly.Fix the finished parts with varnish.

Demoness OOAK


The hair is cut from acrylic threads. The strands can be decorated with beads. The process will be labor-intensive: thread each strand through a needle and insert it into the head - two “curls” are obtained from one thread. The hairstyle turns out unusual if the strands are wound around the horns.

Demoness OOAK

Demoness OOAK


Fantastic details
What makes a fantasy doll is the details: horns, elven ears, tail and wings.
Ears: Ears are formed from white polymer clay. The doll's head is soft and it will be difficult to glue them, so it is better to make holes for sewing. Cooked ears - bake too long.

Demoness OOAK

Demoness OOAK


Horns: formed from 6 strips of polymer clay, pressed together in the middle. Then, with a sharp object, the relief and holes for sewing are applied. If there is no black polymer clay, the part is boiled and then painted.

Demoness OOAK

Demoness OOAK

Demoness OOAK


Tail: The tip of the tail is made from polymer clay.

Demoness OOAK


A tail of the required length is formed with thick wire; to add volume, the part is wrapped with thread, pieces of double-sided tape are glued along the entire length and rolled over the sticky surface with a thin tape.

Demoness OOAK

Demoness OOAK

Demoness OOAK


It is better to burn the edges of the tape with a lighter so that the fiber does not unravel. The detail is decorated with beads. You should leave a piece of wire on the tail to secure it.
Wings: made of wire and satin ribbons. In a mirror image, two frames are twisted from wire and wrapped with thick thread for volume.

Demoness OOAK


Pieces of double-sided tape are attached pointwise to the thread, and a narrow satin ribbon is carefully wound on top.

Demoness OOAK


The membranes between the wings are made from pieces of wide ribbons: they are fastened with tape into a sheet.

Demoness OOAK

Demoness OOAK

Demoness OOAK

Demoness OOAK

Demoness OOAK


Scotch tape is used for temporary fixation and to add rigidity. To make the details neat, a diagram of the wing frame is drawn. The edges of the ribbons are burned.Then the membranes are sewn to the frame - this is possible thanks to tape winding.

Demoness OOAK

Demoness OOAK

Demoness OOAK


All irregularities are decorated with beads or glass beads, both on the outside and on the inside.

Demoness OOAK

Demoness OOAK


Finishing touches
The wings and tail are secured to the body with remnants of wire.

Demoness OOAK

Demoness OOAK

Demoness OOAK

Demoness OOAK


The clothes are made from ribbons - you can glue them and sew them directly onto the doll’s body, or decorate them with beads and seed beads.

Demoness OOAK

Demoness OOAK

Demoness OOAK


If the wings are not standing, you can use a trick: fasten the key points of the wing with a thin fishing line, threading it through the head. The doll will stand on a triple support: legs, tail and sushi stick stand. Attach a wire to the end of the stick and apply a camouflage pattern of thread and tape.

Demoness OOAK

Demoness OOAK


Attach the support stick under the tail or at the waist.

Demoness OOAK

Demoness OOAK

Demoness OOAK

Demoness OOAK

Demoness OOAK
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (1)
  1. Raven
    #1 Raven Guests 7 October 2015 23:30
    0
    What colors did you use and how did you paint it so that it turned out so smooth and even?