Bracelet made using macrame technique

One day I decided to make a bracelet using the macrame technique with diagonal knots. But I wanted the part of the diamond where the central bead is located to be filled with a pattern.

bracelet

macrame bracelet


You will need:
1 mm thread: 2 pieces of 1.5 m each and 1 piece of 1.3 m.

was filled with a pattern


Let's make a single canopy on a 1.3m segment ring. I had a ring with a diameter of 1 cm.
Then we will also make a single canopy of a 1.5 m piece of thread on the edges of the thread. 2. We will form a knot from right to left. The photo shows that a knot is wound around the 1st yellow thread with the 2nd green thread.

Let's make a single canopy


3. Similarly, we make a knot with the 3rd blue thread around the 1st yellow thread;
4th white thread around 2nd green thread;

We make a knot in the same way


Here's what came out in the end:

This is what happened in the end


4. It’s the bead’s turn. A 7 mm diameter bead (yellow in the photo, but green is better) is strung on thread No. 4, marked in white. The yellow thread goes under the bead to the left - this is important! The blue one lies on top of the white one.
5. A knot is made around the blue thread with white thread from left to right. It is similar to a right to left knot, only the direction of the threads is reversed. The photo shows what happened.

make a bracelet


Further in the photo you can see that a knot is made around the yellow thread with green thread from right to left.

make a bracelet


6. Around the yellow thread we form a knot with blue thread from right to left.

make a bracelet


7.We string orange beads onto the outer threads (marked in purple and black). We bring the black thread to the center, and around it we tie knots with the 4th white and 3rd blue thread.

assembling the bracelet


8. This is what happened. As a result, there were 2 side threads left in the center: purple and black. Around the purple one we tie a knot with black thread from right to left.

assembling the bracelet


9. This is what happened. Now around the purple thread we make knots first with the 3rd blue one, then with the 4th white one.

assembling the bracelet


10. We do the same on the other side. We make a knot around the black thread with yellow and green thread.

assembling the bracelet


11. This is what happened. Now we finish the bracelet element: we make a blue knot around the yellow thread.

assembling the bracelet


12. Next, we form the bracelet, repeating the steps from point 2. Next we attach the fastener.
You can also use this bracelet as a cat collar.

collar
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)