Ice access
It's still winter outside, and sometimes there is severe ice. And in order to avoid falling on the ice, we will make ice access bars like this.
For this we need:
- An inner tube from a bicycle (it’s better to take a car one, as it is stronger and wider than a bicycle one), but unfortunately I didn’t have one at hand.
- We will also need small bolts with nuts (preferably they are all the same size), their number is not particularly important. Bolts from Soviet iron construction kit work very well.
I took 5 pieces for each ice access.
And so let's get started - first, let's cut the camera lengthwise (from a bicycle or car) and cut it into this shape.
We secure the bolts in the wide part by screwing them onto the nuts.
For the process of putting them on, as well as a more detailed manufacturing process, watch the video:
For this we need:
- An inner tube from a bicycle (it’s better to take a car one, as it is stronger and wider than a bicycle one), but unfortunately I didn’t have one at hand.
- We will also need small bolts with nuts (preferably they are all the same size), their number is not particularly important. Bolts from Soviet iron construction kit work very well.
I took 5 pieces for each ice access.
And so let's get started - first, let's cut the camera lengthwise (from a bicycle or car) and cut it into this shape.
We secure the bolts in the wide part by screwing them onto the nuts.
For the process of putting them on, as well as a more detailed manufacturing process, watch the video:
Similar master classes
Particularly interesting
Comments (0)
