How to make a mini metal hacksaw for working in hard-to-reach places

In hard-to-reach places, where you can’t even turn around on your own, working with a large tool is extremely inconvenient and unsafe. For example, working with a hacksaw. There will always be a place where you can’t get to with a regular hacksaw. Even a small grinder will not work due to the fear of fire. An ordinary hacksaw, whether for wood or metal, needs a certain amount of space to swing. With the same, but small hacksaw, there is almost no space needed - the amplitude of translational movements is extremely small, and there will be a minimum of difficulties in work. Making such a hacksaw yourself, from any hand-made junk, will not be difficult at all. The only thing you have to buy is a metal cloth, for 15 rubles. You can, of course, buy an entire mini hacksaw, but it is not cheap, and you usually have to use it extremely rarely. Besides, I think everyone can find a piece of thin pipe and a couple of bolts in their household.
How to make a mini metal hacksaw for working in hard-to-reach places

Will need


  • The metal blade is standard.
  • Square tube, 10×10×500 mm.
  • Two bolts for 6, and nuts for them
  • Two 8mm bolts with wings (you can use regular nuts if you don’t have any with wings).
  • Screwdriver for bolts.
  • Pliers.
  • Marker.
  • Ruler.
  • Drill.
  • Drills for 3, 4, as well as a small cutting disc.
  • The handle is from an old file.

How to make a mini metal hacksaw for working in hard-to-reach places

Making mini hacksaws for metal


To begin with, you can make a canvas of the desired size. To do this, using a mini drill and a cutting disc, you need to divide the standard blade into two equal parts.
How to make a mini metal hacksaw for working in hard-to-reach places

Also, it is necessary to round off the cut edges of the canvas and make the same holes in them as at the opposite ends. The result should be two completely identical fifteen-centimeter canvases.
How to make a mini metal hacksaw for working in hard-to-reach places

You can drill the canvas with the most ordinary metal drill - the canvas will not burst. It's not so hard in the middle. During the manufacturing process at the factory, only the jagged edges are hardened in it using instantaneous induction heating, and the middle remains raw, flexible, and not at all brittle. Next, we measure and saw off two pieces of 90 mm each from the tube (I took a square one - it’s easier to work with).
How to make a mini metal hacksaw for working in hard-to-reach places

How to make a mini metal hacksaw for working in hard-to-reach places

Now we again measure 20 mm from these segments from each end.
How to make a mini metal hacksaw for working in hard-to-reach places

You need to cut out the middle of them. Like this:
How to make a mini metal hacksaw for working in hard-to-reach places

It is necessary to fit the sawn ends with pliers. Pull one end apart so that the main tube fits into it. The opposite - on the contrary, squeeze it so that the canvas is held in it.
How to make a mini metal hacksaw for working in hard-to-reach places

We drill 3 mm holes in the flattened ends of both workpieces.
How to make a mini metal hacksaw for working in hard-to-reach places

We insert the canvas into the flattened edges of the blanks and tighten them with 6 bolts.
How to make a mini metal hacksaw for working in hard-to-reach places

We saw off 200-250 mm from the tube for the main frame-holder, and try on blanks with canvas for it.
How to make a mini metal hacksaw for working in hard-to-reach places

We mark the places for the wing bolts with a marker, and drill through holes with a 4 mm drill.
How to make a mini metal hacksaw for working in hard-to-reach places

We insert the bolts at 8 and tighten them with wings.
How to make a mini metal hacksaw for working in hard-to-reach places

These wings are needed so that you can move or move apart the blade holders without keys and screwdrivers if you ever have a blade of greater or shorter length. Next, we make longitudinal cuts in the tail part of the main tube.
How to make a mini metal hacksaw for working in hard-to-reach places

30 millimeters will be enough. Squeeze the sawn area with pliers.
How to make a mini metal hacksaw for working in hard-to-reach places

How to make a mini metal hacksaw for working in hard-to-reach places

We drive in the handle.
How to make a mini metal hacksaw for working in hard-to-reach places

Well, the mini hacksaw is ready. A test can be done.
How to make a mini metal hacksaw for working in hard-to-reach places

It cuts, of course, not as fast as a regular hacksaw, but for small objects, such as a rusty nail or screw, in a hard-to-reach place - just right! And, what a savings on canvases - they made two out of one! And if it is also double-sided, like mine, then you can use it four times before it becomes dull!

Watch the video


Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)