Hair band “Chrysanthemum terry”

To create a hair tie “Terry Chrysanthemum” you will need:

Scrunchy


- ready-made elastic band for hair of any thickness.
- a bright pink satin ribbon, the width of which is 2.5 cm.
- scissors.
- a gun for working with hot glue.
- tweezers with a curved edge.
- outline for fabric with glitter.
- green satin ribbon.
- candle or lighter.

Sequence of flower creation. Cut the bright pink ribbon into small pieces. Their sides are 2.5 x 2.5 cm, 50 of them will be required.

cut


Fold the two sides of one of the corners together to form a triangle, leaving the wrong side of the tape on the outside. We clamp it with tweezers and singe the edges with fire, gluing them together.

Fold two sides


Then we straighten the resulting part, and place the created seam exactly in the middle of the workpiece.

straighten the resulting part


We get a small bag. We pinch the bottom corner with the edges of the tweezers, stepping back a little from the edge. Then we cut the fabric to the point where the tweezers are attached and singe the sections.

cut the fabric


We get such a petal. From the remaining blanks we create the same ones, following the same sequence.

we create the rest of the blanks


Next, cut out a circle with a diameter of 4 cm from a wide ribbon.We select the color of the ribbon in accordance with the shade of the petals. We singe the edges of the resulting part to avoid shedding. Now we glue the prepared petals around the entire circumference.

select according to


Gradually distributing them in a circle, forming the first row.

distributing them in a circle


Then we attach the petals of the second row, placing them in the spaces between the parts of the previous row.

preparing the center of the flower


Now we prepare the middle of the flower. To do this, take one petal and twist it into a tube, using hot glue to secure it.

preparing the center of the flower


Then we glue other petals around this tube, evenly attaching them around the circumference. We fasten a total of 15 parts in this way.

glue the tubes


We get such a center, which we glue in the center of the prepared flower base.

We get this middle


Next, turn the flower upside down. And glue another row of petals, placing them tightly one to the other.

turn the flower over


Thanks to this row, the flower will turn out more lush and voluminous.

turn the flower over


Now we prepare leaves for decoration from the green ribbon. To do this, take a rectangle with sides 6.5x5 cm.

prepare the leaves


From it we cut out leaves connected at the base.

prepare the leaves


Carefully singe all existing cuts.

prepare the leaves


We get these leaves, you will need 3 of them. Next we attach them to the base of the flower.

We get leaves like this


Then we glue the elastic band, attaching it to the center of the flower.

Scrunchy


Then from the green ribbon we cut out a small oval-shaped piece with two notches, which we use to cover the junction of the flower and the elastic band.

Scrunchy


After this, we turn the flower face up and apply a glitter outline along the edges of all the bright pink petals.

Scrunchy


We get such a charming chrysanthemum!
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)